You are visitor: 
on this page.
16X84 PIC PROGRAMMER
Diagram For The Print
Right click it, save it to your disk and later print it out.
The physical right dimention on the print plate is: 96 X 65 mm.
If you have Paint Shop Pro, you can insert the size under Page Setup. Width: 103
and Height: 68.
The image is mirror faced for copy over on a transparent paper. (The UV developing methode.)
Component Placement
The image belowe is showing the component placement, it is maybe difficult to see it on the screen,
but it will appear more clearly when you print it out.
Component List
1 x Smart card reader
1 x Double switch
2 x Single switch
1 x Zener Diode 5.6V
1 x Diode 1N4148
1 x 5mm LED
1 x Capacitor 100uF
2 x Resistor 2.2 kohm
1 x Resistor 10 kohm
1 x Resistor 22 kohm
1 x Resistor 3.9 kohm
1 x 9 Pins seiell plug (Female)
About 1 meter 5cords Signal wire
Picprog is a very good and easy program for programming with. (148 Kb)
This page hosted by
Get your own Free Homepage